Introduction
DEED VB63F5 5-Axis Simultaneous CNC Vertical Machining Center is a high-efficiency, high-precision machining equipment. The workpiece can complete complex processing procedures in one clamping process, so this equipment can adapt to the processing of modern molds such as auto parts. Pentaaxis means our device has five axes. The XYZ axis and the ac axis form linkage processing, so it is very good at space surface processing, special-shaped processing, hollow processing, punching, oblique hole, oblique cutting, etc., and its uses are very diverse.
Features
The overall structure of DEED VB63F5 5-Axis Simultaneous CNC Vertical Machining Center is rigid. The Y-axis adopts a dual-drive design, so it can maintain a good balance even in the case of high-speed movement.
The box-type headstock structure can make the high torque output more stable.
The A/C axis is directly driven by a torque motor without a reducer, so the running accuracy can be improved and the speed can be increased.
The grating ruler can make the machine tool still have high machining accuracy and positioning accuracy in the case of high-speed movement.
The in-line tool magazine directly driven by the servo motor runs fast and has precise positioning, which enables DEED VB63F5 5-Axis Simultaneous CNC Vertical Machining Center to meet various process requirements.
Data
| TRAVEL | ||
| 1. | X-axis travel | 800mm |
| 2. | Y-axis travel | 800mm |
| 3. | Z-axis travel | 600mm |
| 4. | A-axis travel | ±135° |
| 5. | C-axis travel | continuously 360° |
| SPINDLE | ||
| 1. | Spindle Power | 34kw |
| 2. | Spindle Torque | 72/91Nm |
| 3. | Spindle taper | HSK-A63 |
| 4. | Max speed | 18000rpm |
| 5. | Drive type | Motorized spindle |
| TABLE | ||
| 1. | Size | Φ660mm |
| 2. | Max.Swing diameter | Φ900mm |
| 3. | T-Slot (size * quantity * space) | 18×5×125 mm |
| 4. | Max load | 800 Kg |
| FEED | ||
| 1. | X/Y/Z axis Rapid traverse | 60/60/40 m/min |
| 2. | A/C axis speed | 60rpm/min |
| PRECISION | ||
| 1. | X/Y/Z axis positioning | 0.008mm |
| 2. | X/Y/Z axis repeatibility | 0.004mm |
| 3. | A/C axis repeatibility | ±5'' |
| ATC | ||
| 1. | Tool magazine type | Chain and direct put-in type |
| 2. | Tool magazine capacity | ATC-40T |
| 3. | Maximum tool size(full/unfull/length) | Φ75/Φ120/ 270 mm |
| 4. | Maximum tool weight | 6kg |
| OTHERS | ||
| 1. | Air Pressure | 0.65Mpa |
| 2. | Power Capacity | 100KVA |
| 3. | Machine Weight | 20000Kg |
| 4. | Floor Space Dimension(L *W *H) | 6200×2500×3650mm |
Hot Tags: deed vb63f5 5-axis simultaneous cnc vertical machining center, suppliers, manufacturers, factory