Product Information
Due to the high cutting speed and feed speed of the CNC vertical machining machine V1690L, the material removal rate per unit time in high-speed cutting has been greatly improved compared with the conventional cutting, greatly reducing the cutting time, and it is also conducive to the continuous rough machining and finishing of parts on the same machine tool, facilitating the realization of process concentration. The machine not only improves the utilization rate of the equipment, but also reduces the loading and unloading times of the workpieces and shortens the auxiliary working hours.
CNC vertical machining machine V1690L can effectively control chip buildup, surface residual stress and other defects due to cutting in a higher cutting speed range, so high-speed cutting can obtain nearly ground surface quality, effectively reducing subsequent processing procedures. For example, when high-speed cutting hardened steel materials, the surface roughness Ra can be lower than 0.6um. When high-speed milling gray iron workpieces, the surface roughness can be as low as Ra 0.63um, which is equivalent to the level of grinding technology. Therefore, high-speed cutting is particularly suitable for fields such as optical instruments and precision manufacturing industry.
Application
The vertical machining center is mainly used for processing various IT parts, hardware parts, automobile parts, wheel hubs, 3C industrial parts and other precision parts.
Specification
| TRAVEL | |
| X-axis travel | 1600mm |
| Y-axis travel | 910mm |
| Z-axis travel | 810mm |
| Spindle nose to table surface | 150~960 mm |
| SPINDLE | |
| Drive type | Belt drive |
| Spindle taper | BT50 |
| Max. Speed | 5000 rpm |
| Spindle Power | 11/15 kW |
| Spindle Torque | 168/305 Nm |
| TABLE | |
| Size | 1800x900mm |
| T-Slot (size * quantity * space) | 22×6×130mm |
| Max load | 1600kgs |
| FEED | |
| Max.cutting speed | 1-8000 mm/min |
| Rapid traverse | 20/20/20 m/min |
| ACCURACY | |
| Positioning(half-closed loop) | 0.012mm |
| Repeatability(half-closed loop) | 0.008mm |
| ATC | |
| Type | Disc type ATC 24T |
| Maximum tool size(full/unfull/length) | Φ105/Φ200/ 350 mm |
| Maximum tool weight | 15kg |
| OTHERS | |
| Air Pressure | 0.65Mpa |
| Power Capacity | 30kVA |
| Machine Weight | 14200kgs |
| Machine Floor Space (L *W *H) | 4000x3800x3600mm |
Standard
Whole machine cover
Belt type spindle BT40-8000rpm
Spindle taper air blow
Spindle air curtain dust-free
Spindle ring spray
Flexible cover
Tri-color alarm light
Auto lubrication system
Air gun
Disk type ATC BT40-24T
Heat exchange for electrical cabinet
Manual pulse generator
Working lamp
4-axis preparation
Communication interface
Workpiece water cooling
Workpiece air cooling
Option
CTS 20bar/30bar
Chain type conveyor and cart
Electric cabinet air conditioner
Flush device
Spindle temperature control system
Water gun
Siemens/Mitsubishi controller
Etc.
Hot Tags: cnc vertical machining machine v1690l, suppliers, manufacturers, factory